All
Pallet Rack frames feature welded footplates, 2"
on center beam adjustment, size availability to 48"
wide and 192" high. Sahara or Blue-Gray are standard
colors. Frame size should be chosen to allow a minimum
pallet overhang of 2" front and 2" rear.
The Pallet Rack load
capacity per frame is 26,000 LB. To preclude overturning,
the frame depth x 6 cannot exceed the height of the
topmost loaded beam pair, unless all the frames are
properly anchored or braced externally.
The Pallet Rack Wall Mount Bracket,
available in depths of 6", 8", 10" and 12",
provides consistent spacing from frame to wall. Hardware pack includes
bolts to secure the bracket to the frame.
This bracket is not
recommended for use when local codes require seismic calculations.
Light, regular
and heavy duty beam configurations available in 36"
991.44 cm), 48" (121.92 cm),, 60" (152.40 cm),
84" (213.36) 96" 243.84 cm), 108" (274.32),
120" (304.80 cm), 132" (335.28) and 144"
(365.76 cm). Decking available in unfinished 2"
95.08 cm) dimensional lumber, high density particle board,
or wire grid.
- Deck load capacities up to
10,000 pounds on Heavy Duty Pallet Racking. -
Manufactured from heavy gauge high-tensile strength steel.
Heavy pallet racking
solution when substantial weights or handling equipment precludes
the use of wide span.
Pallet Rack Beams are available in three heights for differing
load capacities and feature choice of step depths to accommodate
either 5/8" particle board decks or 2" dimensional
lumber decking.
Beams are
slotted in the step to accept the correct number of deck
supports under decking.
|
Available in 10 packs consisting of
five 12 gauge and five 16 gauge shims for use in leveling pallet
rack systems.
E System Sales, Inc. provides
useful information affordable pricing, and online sales of regular
duty and heavy duty Madix Pallet Racking for most all warehouse
applications.
As the image shows above
a pallet rack system of one or more pallet racks that contain two
or more uprights to create what is known as a pallet rack system.
A pallet rack system aisle can be as long as need by adding pallet
rack uprights and beams provided your warehouse has adequate space
available. browse this website for all of the necessary components
to create you new pallet rack system or call 800 619 9566 with your
measurements and specs and we will accurately quote you on your
pallet rack system needs.
`Pallet racking integral
locking beams and angle floor anchors maintain stability and reduce
the chances of possible disengagement.
Deck Supports
are formed heavy gauge steel with tabs which fit into beam
slots, providing support for regular duty decking or to
tie beams together to prevent rotation of beams where heavy
duty decking is used.
How to figure pallet rack pricing.
Lets figure you want an aisle of pallet racking 32' long X 8' High
X 48" Deep to fit a normal sized pallet with regular duty pallet
racking. You will need 5 96' high pallet rack upright frames
costing $99 each costing $495, next you will need 8 8' pallet rack
beams costing $33 each costing $264, the entire section described
above would cost $495 + $264 = $759, next you might want to consider
some pallet rack shims and wall mount brackets. For an
exact quote call 800 619 9566.
|